Q: |
Can I use other materials during construction of the model? |
A: |
We will provide the materials needed for the structure. The material used for isolation or energy dissipation is provided by oneself. You must register these materials when you sent your design drawing. Only the registered material is allowed to be added to the model.
Note: All metal materials should be weighted during the registration, and the total mass is limited to 300 g. Only the registered and weighted metal materials can be used in the competition.
If you are not sure what material is allowable, please contact IDEERS. |
|
|
Q: |
Can I use my own tools to build the model? |
A: |
Yes, but these tools should be reported to the staff during the registration. |
|
|
Q: |
Can I drill a hole on the baseboard? |
A: |
No! |
|
|
Q: |
Can I tie the steel blocks to the model? |
A: |
No, you have to glue the steel blocks on the floor board. |
|
|
Q: |
Can I use the floor isolation system? |
A: |
No, the mass block should be directly glued on the floor board. |
|
|
Q: |
How do we mount the model to the shaking-table? |
A: |
There are 16 holes on the edge of the baseboard for mounting the baseboard to the shaking-table. You must screw the baseboard to the shaking-table. |
| |
|
Q: |
Is there any rule about the clearance? |
A: |
The rules about the exterior clearance is the same as the collage team, but the interior clearance rule is canceled this year. |
